-- I'm trying to set up a guest ldom on a T1000. It initializes the vcpus and part of the devices and then "hangs" after the following line:
pseudo-device: drctl0 drctl0 is /pseudo/drctl at 0 The cursor keeps rotating and hangs here. Any suggestions? There were suggestion to remove JASS which i did and it still hang. root at nbs-uglb008 # ldm list-bindings >NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >primary active -n-cv SP 4 4G 0.5% 24m > >MAC > 00:14:4f:95:0a:74 > >VCPU > VID PID UTIL STRAND > 0 0 0.9% 100% > 1 1 0.4% 100% > 2 2 0.3% 100% > 3 3 0.4% 100% > >MAU > CPUSET > (0, 1, 2, 3) > >MEMORY > RA PA SIZE > 0x8000000 0x8000000 4G > >VARIABLES > diag-switch?=true > nvramrc=devalias vx-rootmirror >/pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 1,0:a devalias vx-rootdg01 >/pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 0,0:a > >IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > >VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > CLIENT PORT > nbs-dev11i at nbs-dev11i 5000 > >VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 bootdisk-dev11i /dev11i/dev11ibootimage > bootdisk1-vol1 >/dev/vx/dsk/ldom_dg/vdev11i > dev11ibootdisk2 >/dev11i2/dev11ibootimage2 > CLIENT VOLUME > vdisk1 at nbs-dev11i bootdisk1-vol1 > vdisk-dev11i at nbs-dev11i bootdisk-dev11i > vdiskdev11i2 at nbs-dev11i dev11ibootdisk2 > >VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f9:cd:1a bge0 switch at 0 prog,promisc > PEER MAC > dev11i-vnet0 at nbs-dev11i 00:14:4f:fa:60:cd > NAME MAC NET-DEV DEVICE MODE > primary-vsw1 00:14:4f:fb:17:83 bge1 switch at 1 prog,promisc > PEER MAC > dev11i-vnet1 at nbs-dev11i 00:14:4f:f9:84:94 > NAME MAC NET-DEV DEVICE MODE > primary-vsw2 00:14:4f:f9:9b:4f e1000g2 switch at 2 prog,promisc > primary-vsw3 00:14:4f:f9:ba:b1 e1000g3 switch at 3 prog,promisc > >VCONS > NAME SERVICE PORT > SP > >------------------------------------------------------------------------------ >NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >nbs-dev11i active -t--- 5000 4 4G 25% 8m > >MAC > 00:14:4f:f9:97:dd > >VCPU > VID PID UTIL STRAND > 0 4 100% 100% > 1 5 0.0% 100% > 2 6 0.0% 100% > 3 7 0.0% 100% > >MEMORY > RA PA SIZE > 0x8000000 0x108000000 4G > >VARIABLES > auto-boot?=true > boot-device=/virtual-devices at 100/channel-devices at 200/disk at 2 > >DISK > NAME VOLUME TOUT DEVICE SERVER > vdisk1 bootdisk1-vol1 at primary-vds0 disk at 0 primary > vdisk-dev11i bootdisk-dev11i at primary-vds0 disk at 1 primary > vdiskdev11i2 dev11ibootdisk2 at primary-vds0 disk at 2 primary > >NETWORK > NAME SERVICE DEVICE MAC > dev11i-vnet1 primary-vsw1 at primary network at 0 > 00:14:4f:f9:84:94 > PEER MAC > primary-vsw1 at primary 00:14:4f:fb:17:83 > NAME SERVICE DEVICE MAC > dev11i-vnet0 primary-vsw0 at primary network at 1 > 00:14:4f:fa:60:cd > PEER MAC > primary-vsw0 at primary 00:14:4f:f9:cd:1a > >VCONS > NAME SERVICE PORT > nbs-dev11i primary-vcc0 at primary 5000 > >root at nbs-uglb008 # ldm list-services >VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > >VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 bootdisk-dev11i /dev11i/dev11ibootimage > bootdisk1-vol1 >/dev/vx/dsk/ldom_dg/vdev11i > dev11ibootdisk2 >/dev11i2/dev11ibootimage2 > >VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f9:cd:1a bge0 switch at 0 prog,promisc > primary-vsw1 00:14:4f:fb:17:83 bge1 switch at 1 prog,promisc > primary-vsw2 00:14:4f:f9:9b:4f e1000g2 switch at 2 prog,promisc > primary-vsw3 00:14:4f:f9:ba:b1 e1000g3 switch at 3 prog,promisc > >root at nbs-uglb008 # clear >root at nbs-uglb008 # ldm list-bindings >NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >primary active -n-cv SP 4 4G 0.5% 31m > >MAC > 00:14:4f:95:0a:74 > >VCPU > VID PID UTIL STRAND > 0 0 0.7% 100% > 1 1 0.4% 100% > 2 2 0.5% 100% > 3 3 0.4% 100% > >MAU > CPUSET > (0, 1, 2, 3) > >MEMORY > RA PA SIZE > 0x8000000 0x8000000 4G > >VARIABLES > diag-switch?=true > nvramrc=devalias vx-rootmirror >/pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 1,0:a devalias vx-rootdg01 >/pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 0,0:a > >IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > >VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > CLIENT PORT > nbs-dev11i at nbs-dev11i 5000 > >VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 bootdisk-dev11i /dev11i/dev11ibootimage > bootdisk1-vol1 >/dev/vx/dsk/ldom_dg/vdev11i > dev11ibootdisk2 >/dev11i2/dev11ibootimage2 > CLIENT VOLUME > vdisk1 at nbs-dev11i bootdisk1-vol1 > vdisk-dev11i at nbs-dev11i bootdisk-dev11i > vdiskdev11i2 at nbs-dev11i dev11ibootdisk2 > >VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f9:cd:1a bge0 switch at 0 prog,promisc > PEER MAC > dev11i-vnet0 at nbs-dev11i 00:14:4f:fa:60:cd > NAME MAC NET-DEV DEVICE MODE > primary-vsw1 00:14:4f:fb:17:83 bge1 switch at 1 prog,promisc > PEER MAC > dev11i-vnet1 at nbs-dev11i 00:14:4f:f9:84:94 > NAME MAC NET-DEV DEVICE MODE > primary-vsw2 00:14:4f:f9:9b:4f e1000g2 switch at 2 prog,promisc > primary-vsw3 00:14:4f:f9:ba:b1 e1000g3 switch at 3 prog,promisc > >VCONS > NAME SERVICE PORT > SP > >------------------------------------------------------------------------------ >NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >nbs-dev11i active -t--- 5000 4 4G 25% 15m > >MAC > 00:14:4f:f9:97:dd > >VCPU > VID PID UTIL STRAND > 0 4 100% 100% > 1 5 0.0% 100% > 2 6 0.0% 100% > 3 7 0.0% 100% > >MEMORY > RA PA SIZE > 0x8000000 0x108000000 4G > >VARIABLES > auto-boot?=true > boot-device=/virtual-devices at 100/channel-devices at 200/disk at 2 > >DISK > NAME VOLUME TOUT DEVICE SERVER > vdisk1 bootdisk1-vol1 at primary-vds0 disk at 0 primary > vdisk-dev11i bootdisk-dev11i at primary-vds0 disk at 1 primary > vdiskdev11i2 dev11ibootdisk2 at primary-vds0 disk at 2 primary > >NETWORK > NAME SERVICE DEVICE MAC > dev11i-vnet1 primary-vsw1 at primary network at 0 > 00:14:4f:f9:84:94 > PEER MAC > primary-vsw1 at primary 00:14:4f:fb:17:83 > NAME SERVICE DEVICE MAC > dev11i-vnet0 primary-vsw0 at primary network at 1 > 00:14:4f:fa:60:cd > PEER MAC > primary-vsw0 at primary 00:14:4f:f9:cd:1a > >VCONS > NAME SERVICE PORT > nbs-dev11i primary-vcc0 at primary 5000 >
