I setup a zfs file image to use as a block device and the process hangs during
the jumpstart of the guest domain
[/usr/local/shlib]# ldm list-services primary
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:27:f7 e1000g1 switch at 0 prog,promisc
[/usr/local/shlib]# ldm list-config
factory-default
initial [current]
[/usr/local/shlib]# shutdown -y -g0 -i6
Shutdown started. Monday, February 25, 2008 3:02:27 PM EST
Changing to init state 6 - please wait
Broadcast Message from root (pts/1) on s0b9a87 Mon Feb 25 15:02:27...
THE SYSTEM s0b9a87 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged
[/]# cd /usr/local/shlib
[/usr/local/shlib]# ./ldom_control info
Adding local domain commands to the user path
####################################################
####Executing ldm commands on the Primary domain####
####################################################
####################################################
####Output from the 'ldm ls-dom' command ####
####################################################
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 8 4G 0.0% 3m
####################################################
####Output from the 'ldm -V' command ####
####################################################
Logical Domain Manager (v 1.0.1)
Hypervisor control protocol v 1.0
System PROM:
Hypervisor v. 1.5.6 @(#)Hypervisor 1.5.6 2007/11/30
08:31\015
OpenBoot v. 4.27.11 @(#)OBP 4.27.11 2008/01/08 14:53
####################################################
####Output from the 'ldm list-services' command####
####################################################
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:27:f7 e1000g1 switch at 0 prog,promisc
####################################################
####Output from the 'ldm list-devices -a' command####
####################################################
VCPU
PID %FREE
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 100
9 100
10 100
11 100
12 100
13 100
14 100
15 100
16 100
17 100
18 100
19 100
20 100
21 100
22 100
23 100
24 100
25 100
26 100
27 100
28 100
29 100
30 100
31 100
MAU
CPUSET BOUND
(0, 1, 2, 3) primary
(4, 5, 6, 7) primary
(8, 9, 10, 11)
(12, 13, 14, 15)
(16, 17, 18, 19)
(20, 21, 22, 23)
(24, 25, 26, 27)
(28, 29, 30, 31)
MEMORY
PA SIZE BOUND
0x0 512K _sys_
0x80000 1536K _sys_
0x200000 62M _sys_
0x4000000 64M _sys_
0x8000000 4G primary
0x108000000 28544M
IO
DEVICE PSEUDONYM BOUND OPTIONS
pci at 780 bus_a yes
pci at 7c0 bus_b yes
####################################################
####Output from the 'ldm list-constraints' command####
####################################################
DOMAIN
primary
MAC
00:14:4f:82:95:ba
VCPU
COUNT
8
MAU
COUNT
2
MEMORY
SIZE
4G
VARIABLES
diag-switch?=true
oem-banner=Authorized uses only. All activity may be monitored and reported.
oem-banner?=true
security-#badlogins=0
security-mode=command
security-password=btd119EL
IO
DEVICE OPTIONS
pci at 780
pci at 7c0
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
VSW
NAME MAC NET-DEV DEVICE
primary-vsw0 e1000g1 switch at 0
####################################################
####Output from the 'ldm ls -l' command ####
####################################################
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 8 4G 24% 3m
SOFTSTATE
Solaris running
VCPU
VID PID UTIL STRAND
0 0 67% 100%
1 1 1.7% 100%
2 2 30% 100%
3 3 0.1% 100%
4 4 23% 100%
5 5 63% 100%
6 6 10% 100%
7 7 0.1% 100%
MAU
CPUSET
(0, 1, 2, 3)
(4, 5, 6, 7)
MEMORY
RA PA SIZE
0x8000000 0x8000000 4G
VARIABLES
diag-switch?=true
oem-banner=Authorized uses only. All activity may be monitored and reported.
oem-banner?=true
security-#badlogins=0
security-mode=command
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
pci at 7c0 bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:27:f7 e1000g1 switch at 0 prog,promisc
VCONS
NAME SERVICE PORT
SP
####################################################
####Output from the 'ldm list-config' command####
####################################################
factory-default
initial [current]
####################################################
####Output from the 'dladm show-link' command ####
####################################################
vsw0 type: non-vlan mtu: 1500 device: vsw0
e1000g0 type: non-vlan mtu: 1500 device: e1000g0
e1000g1 type: non-vlan mtu: 1500 device: e1000g1
e1000g2 type: non-vlan mtu: 1500 device: e1000g2
e1000g3 type: non-vlan mtu: 1500 device: e1000g3
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.11.146.119 netmask fffffe00 broadcast 10.11.147.255
ether 0:14:4f:82:95:ba
vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.11.146.120 netmask fffffe00 broadcast 10.11.147.255
ether 0:14:4f:fa:27:f7
[/usr/local/shlib]# ldm add-domain ws01_4
[/usr/local/shlib]# ldm add-vcpu 4 ws01_4
[/usr/local/shlib]# ldm add-memory 4096m ws01_4
[/usr/local/shlib]# ldm add-vnet ws01_4_vnet0 primary-vsw0 ws01_4
[/usr/local/shlib]# ldm add-vdsdev /dtss0/ldg01.img vol1 at primary-vds0
[/usr/local/shlib]# ldm add-vdisk ldg01 vol1 at primary-vds0 ws01_4
[/usr/local/shlib]# ldm set-var boot-device=ldg01 ws01_4
[/usr/local/shlib]# ldm set-var auto-boot\?=false ws01_4
[/usr/local/shlib]# ldm bind-domain ws01_4
[/usr/local/shlib]# ldm list-domain ws01_4
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ws01_4 bound ----- 5000 4 4G
[/usr/local/shlib]# ldm start-domain ws01_4
LDom ws01_4 started
[/usr/local/shlib]# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "ws01_4" in group "ws01_4" ....
Press ~? for control options ..
{0} ok show-nets
a) /virtual-devices at 100/channel-devices at 200/network at 0
q) NO SELECTION
Enter Selection, q to quit: a
/virtual-devices at 100/channel-devices at 200/network at 0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /virtual-devices at
100/channel-devices at 200/network at 0
{0} ok cd /virtual-devices at 100/channel-devices at 200/network at 0
{0} ok .properties
local-mac-address 00 14 4f f8 9c ac
max-frame-size 00004000
address-bits 00000030
reg 00000000
compatible SUNW,sun4v-network
device_type network
name network
{0} ok boot /virtual-devices at 100/channel-devices at 200/network at 0 -
install
Boot device: /virtual-devices at 100/channel-devices at 200/network at 0 File
and args: - install
Requesting Internet Address for 0:14:4f:f8:9c:ac
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\
That's as far as it gets. I have the latest T2000 firmware installed.
--
This message was posted from opensolaris.org
