Liam Merwick wrote:
> John-Paul Drawneek wrote:
>> ok using b85 for the control ldom i get more issues with SXDE 1/08
>>
>> I get this:
>> SunOS Release 5.11 Version snv_79a 64-bit
>> Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
>> Use is subject to license terms.
>> WARNING: ds at 0: send_msg: ldc_write failed (131)
>> whoami: no domain name
>> WARNING: Cannot mount /etc/dfs/sharetab
>> Configuring /dev
>> WARNING: i_ldc_get_tx_tail: (0x1) cannot read qptrs
>>
>> WARNING: ldc_read: (0x1) unable to read queue ptrs
>> WARNING: i_ldc_rxq_reconf: (0x1) cannot get state
>> Using RPC Bootparams for network configuration information.
>> Attempting to configure interface vnet2...
>>
>> Which is more than before with b83
>>
>> So from the looks SXDE 1/08 is broke on ldoms, b85 works fine.
>>
>> Any body got it to work?
>>
>
> I netbooted SXDE 1/08 just now to see if it worked for me and had no
> problems.
joy
> I'm running a development build of snv_85 on my control domain so it
> should be pretty close to your setup.
>
> Your problem seems to stem from the Domain Services module (ds) not
> being able
> to communicate via LDC. What version of SUNWldm and firmware are you
> running ?
> We'd also need to see the 'ldm ls -l' output before we could hazard a guess
> at what is going wrong.
>
> -- Liam
Sun-Fire-T1000 System Firmware 6.6.1 2008/02/11 15:54
Host flash versions:
OBP 4.28.1 2008/02/11 13:04
Hypervisor 1.6.1 2008/02/11 12:15
POST 4.28.1 2008/02/11 13:29
Control domain SXCR b85
ldm -V
Logical Domain Manager (v 1.0.2)
Hypervisor control protocol v 1.1
Using Hypervisor MD v 1.1
System PROM:
Hypervisor v. 1.6.1 @(#)Hypervisor 1.6.1 2008/02/11
12:15\015
OpenBoot v. 4.28.1 @(#)OBP 4.28.1 2008/02/11 13:04
-bash-3.2$ ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 4G 42% 1m
SOFTSTATE
Solaris running
VCPU
VID PID UTIL STRAND
0 0 72% 100%
1 1 30% 100%
2 2 36% 100%
3 3 30% 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 4G
VARIABLES
boot-device=disk2 disk1 net
nvramrc=devalias disk1 /pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at
0,0:a
devalias disk2 /pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 0,0:b
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
pci at 7c0 bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 cluster1
/dev/zvol/dsk/pool/ldom/cluster1
cluster2
/dev/zvol/dsk/pool/ldom/cluster2
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:f9:47:32 bge0 switch at 0 prog,promisc
primary-vsw1 00:14:4f:f9:f2:eb bge1 switch at 1 prog,promisc
primary-vsw2 00:14:4f:f8:00:52 bge2 switch at 2 prog,promisc
primary-vsw3 00:14:4f:fb:61:00 bge3 switch at 3 prog,promisc
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
cluster1 inactive ----- 4 1984M
MAU
COUNT
1
VARIABLES
auto-boot?=false
NETWORK
NAME SERVICE DEVICE MAC
vnet0 primary-vsw0 network at 0
00:14:4f:f9:56:76
vnet1 primary-vsw2 network at 1
00:14:4f:f9:3e:ca
vnet2 primary-vsw2 network at 2
00:14:4f:fb:45:dd
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk cluster1 at primary-vds0 disk at 0
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
cluster2 inactive ----- 4 1984M
MAU
COUNT
1
VARIABLES
auto-boot?=false
NETWORK
NAME SERVICE DEVICE MAC
vnet0 primary-vsw0 network at 0
00:14:4f:f9:9d:2f
vnet1 primary-vsw2 network at 1
00:14:4f:fb:28:b4
vnet2 primary-vsw2 network at 2
00:14:4f:f8:b3:ea
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk cluster2 at primary-vds0 disk at 0
