I have T2000 with pci buses split between the control domain and a guest. From
the guest, if I boot from a physical disk exported from the control domain then
cfgadm works but if I boot from a file exported from the control domain then I
get this...
[root at sunt2000-shu01-ldom1--->]cfgadm -al
cfgadm: Configuration administration not supported
Even so, fcinfo hba-port works...
[root at sunt2000-shu01-ldom1--->]fcinfo hba-port
HBA Port WWN: 210000e08b86469c
OS Device Name: /devices/pci at 780/pci at 0/pci at 8/SUNW,qlc at 0/fp
at 0,0:fc
Manufacturer: QLogic Corp.
Model: QLE2462
Firmware Version: 4.0.27
FCode/BIOS Version: ISP2422 Host Adapter Driver(SPARC): 1.08.05 07/29/05
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 2Gb
Node WWN: 200000e08b86469c
HBA Port WWN: 210100e08ba6469c
OS Device Name: /devices/pci at 780/pci at 0/pci at 8/SUNW,qlc at
0,1/fp at 0,0:fc
Manufacturer: QLogic Corp.
Model: QLE2462
Firmware Version: 4.0.27
FCode/BIOS Version: ISP2422 Host Adapter Driver(SPARC): 1.08.05 07/29/05
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 2Gb
Node WWN: 200100e08ba6469c
Is this expected behavior?
Thanks,
Vic
--
This message was posted from opensolaris.org
