Hi all,
I have a bit of a problem here and was hoping you guys could help me out.
I've got a T1000 configured with 2 guest domains, test and prod. Within the
prod domain we have 2 zones installed. Zone A is required to be connected to
VLAN 100 and Zone B is required to be connected to VLAN 114. However my
requirement is that Zone A should not be able to route to Zone B via the
vswitch, however it appears this is the case.
I setup a vswitch and allocated 2 virtual network interfaces to the domain,
plumbed these in and allocated ip addresses (/etc/hostname.vnet*) and then
added network devices in the zone configuration (zonecfg -z blah). However,
I can log into Zone A and ssh to Zone B and vice versa. It's like the
vswitch is routing or bridging between these 2 VLANS. Is this expected
behaviour. Thanks in advance.
Stu
$ ldm list -o network prod
NAME
prod
MAC
00:14:4f:f8:93:c3
NETWORK
NAME SERVICE DEVICE MAC
MODE PVID VID MTU
pnet0 primary-vsw0 at primary network at 0
00:14:4f:fa:4a:a4 100 1500
pnet1 primary-vsw0 at primary network at 4
00:14:4f:f8:47:ea 114 1500
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/ldoms-discuss/attachments/20100106/d152fbfb/attachment.html>
