Well, that's good to know, thanks.
Well. It looks like I shall have to modify my plans. It's better that way anyway I
guess.
Now my order of attack is
1. Get it working.
This involves initial testing in Windows, but I know Windows and the drivers are
written for Windows.
2. Get it working on LRP. I'm not sure what image I'll use for that yet.
3. Get the ppp over ssh working, I'm hoping that that won't take to long.
4. Write it up! Everything in one place. Right now, there are elements of the
design EVERYWHERE. Antenea's there, card mods here, etc.
-just added
5. IPSec.
What is the overhead of the ipsec tunnel?
6. Re-write.
Heck, I'd be doing it this weekend, but I'm going out of town, I'm so conflicted. :)
Steven Peck
On Fri, 27 July 2001, "Charles Steinkuehler" wrote:
> I'm looking to do this as well, but I plan on using IPSec instead of
> PPP/ssh. Please be aware that a PPP/ssh link will not degrade well if you
> start loosing packets...the PPP layer and the TCP layer under ssh *both* try
> to account for dropped/mangled packets, and can wind up interfering with
> each other in bad ways. IPSec is designed to work with 'lossy' networks,
> and takes care of dropped/mangled packets cleanly. Note that as long as
> your link is clean, PPP/ssh should work fine...
>
> Charles Steinkuehler
_______________________________________________
Leaf-devel mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-devel
