<x-flowed>At 03:24 PM 1/27/01 -0500, Johan Ugander <[EMAIL PROTECTED]> wrote:
>Hello leaf-hardware!
>
>Also, the cardmgr I am using is 3.1.14, copied from the WRIP package,
>because the cardmgr that compiled on my k6/2.2.15 along with the modules i
>am using returns a "Segmentation Fault." So do all the other binary tools
>from the pcmcmia-cs package. They work fine on my k6/2.2.15 but not on
>this embedded system which is 486/2.2.16. I would say that this could be
>the cause, if it weren't for the fact that everything worked with the
>other keyboard, which I don't have access to until monday, and I need to
>get work done!
Johan,
No one else on either list has tried to answer this, so I'll give it a
shot. Be forewarned, I've never setup pcmcia on a LEAF release or LRP.
First suggestion. Make a backup image of your working floppy, and make a
new floppy using the backup image. That way, you'll at least have something
that works for the original setup.
8MB of memory is kind of low. The recommended minimum is 12MB. Have you
tried reducing the ramdisk size, or changing the package load order? Let me
know if neither of these suggestions work, and I'll try to come up with
something else for you to try.
Rick Onanian, and Morgan W. Reed are working on pcmcia support.
--
Mike Noyes <[EMAIL PROTECTED]>
http://leaf.sourceforge.net/
_______________________________________________
Leaf-hardware mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-hardware
</x-flowed>
