I've been sharing some of my experiences with Mike and Lynn. Transcript below. It also looks like I've blown my SST DoM during trials of WP jumper which involved soldering. It can be partitioned, formatted etc. But during LEAF loading it says "hdc: lost interrupt".
Dear Mike/Lynn/Brad: I soldered a jumper on my SST DoM. I expected it to give me a mounted as readonly filesystem message when it is mounted. It did not. I saved a file to that fs by piping output of ls to a file. That also went thro'. I was puzzled. I then tried an explicit sync - Module reported an error No DRQ after issuing write. Status error status=0x51 (DriveReady SeekComplete error) Status error status=0x04 (DriveStatusError) This make the drive read only but looks convoluted. Does it not? I removed the jumper and did a sync, it went thro' smoothly. I expected the system to report readonly at mount time like it does for write-protect floppies. Any other experiences? Mohan I've also been looking at SBC/Boxes to run LEAF. Particular interest was for HW where we can plug in and plug out CF cards without opening the box. GCTGLOBAL/ALLWELL has a box where the casing has a slot to plug in a CF into a CF-IDE drive mounted inside the set top box. All associated data also given below. Dear Mr.. Mohan, Thank you for interested in our products. For building a Router,STB3036-CF is often used by our current customer. STB6086N should be good also due to it's higher MHz. Both are bootable from CF, since modulator is IDE connection. I have both price for your comparison. STB3036N-CF w/266MHz,64MB SDRAM,CF Modulator,1NIC...US$264 *(+$10 for additional NIC) STB3036N-CF w/667MHz,64MB SDRAM,CF Modulator,2NIC...US$299 We have office in Taiwan ,but handling most of OEM account there. For your reference,the shipping cost for one STB is $60 Please let me know if I can assist you for ordering. B/R, Albert Ho GCT-ALLWELL 626-968-1116 [EMAIL PROTECTED] ----- Original Message ----- From: "S Mohan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 30, 2002 12:51 AM > I'm looking at barebone hardware to build a router. Looks like the STB > 6086N2-CF would fit my bill. Can I know the price of this piece? Is the CF > modulator connected to the IDE and thus bootable? > > Do you have distributors in Asia Pac? I'm in India. > > Bye > S Mohan Nagasaki has an interesting box http://www.nagasaki.com.tw. MS-2300LLL Geode based with 3LAN cards and CF reader on board. Neatly packaged as a book PC.Disadvantage is that we need to open the box to plug in the CF. Mohan -----------original from vendor---------------- MS-2100 mini server include follow items: - MS-2100 mainboard x 1 - NS Geode GX1 300Mhz CPU processor x 1 - 64MB SODIMM memory x 1 - PCMCIA socket x 1 - Compact flash socket x 1 - Case for MS-2100 mini server x 1 - Power adapater for MS-2100 x 1 The price is : US$ 225 per system. Delivery date : Within 3 days after receipt of your T/T. Regards Andy [EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Leaf-hardware mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-hardware
