Set IPFWDING_FW=YES
There may be other problems, but try this first.
-Richard
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of ahmad
Sent: Monday, July 02, 2001 1:56 AM
To: [EMAIL PROTECTED]
Subject: [Leaf-user] LRP as four port router
My aim is to make a four ethernet port router.For the testing purposes i
have attached four rtl8139 ethernet cards with my LRP machine .
They all are configured .Each ethernet card is attached to a single
computer which will be soon shifted to a network of computers through a
hub/switch.
the details of my network is as follows.
eth 0 = 192.168.1.2 is attached to computer A = 192.168.1.10
eth 1 = 192.169.2.2. is attached to computer B = 192.168.2.10
eth2 = 192.168.3.2 is attached to computer C = 192.168.3.10
eth3 = 192.168.4.2 is attached to computer D = 192.168.4.10
I am using LRP 2.9.8.
The problem i am facing is that all of the four computers i.e A,B,C,D
are pinging to LRP and LRP is also pinging to them
I can c the entries of the four networks is the routing table of LRP
using ip route command
but the problem is that the computer A is not pinging to computer B.i
need this to happen and then my real works start.
Why they are not pinging?
Is any probem with the network settings?
Should i have to change the firewall policy?
PLS give me the right solution
my network.conf file is
########################################################################
####
# Auto configuration bypass (Say NO to use this file)
########################################################################
####
lrcfgDIRECT_SETTINGS_ONLY=NO
########################################################################
####
# Default Settings
########################################################################
####
VERBOSE=YES
MAX_LOOP=4
DHCP_SLEEP=15
IPFWDING_KERNEL=YES
IPFWDING_FW=NO
IPMASQ_DLOOSE=NO
CONFIG_HOSTNAME=YES
CONFIG_HOSTSFILE=YES
CONFIG_DNS=YES
########################################################################
####
# Interfaces
########################################################################
####
IF0_IFNAME=eth0 # interface eth0 is attached to computer 192.168.1.10
IF0_IPADDR=192.168.1.2
IF0_NETMASK=255.255.255.0
IF0_BROADCAST=192.168.1.255
IF0_IP_SPOOF=NO
IF1_IFNAME=eth1 #interface eth2 is attached to computer 192.168.2.10
IF1_IPADDR=192.168.2.2
IF1_NETMASK=255.255.255.0
IF1_BROADCAST=192.168.2.255
IF1_IP_SPOOF=NO
IF2_IFNAME=eth2 #interface eth2 is attached to computer 192.168.3.10
IF2_IPADDR=192.168.3.2
IF2_NETMASK=255.255.255.0
IF2_BROADCAST=192.168.3.255
IF2_IP_SPOOF=NO
IF3_IFNAME=eth3 #interface eth3 is attached to computer 192.168.4.10
IF3_IPADDR=192.168.4.2
IF3_NETMASK=255.255.255.0
IF3_BROADCAST=192.168.4.255
IF3_IP_SPOOF=NO
#IF2_IFNAME=eth1:0
IF2_IPADDR=192.168.0.1
IF2_NETMASK=$IF1_NETMASK
IF2_BROADCAST=$IF1_BROADCAST
IF2_IP_SPOOF=NO
########################################################################
####
# Hosts
########################################################################
####
# HOST0_IPADDR=123.102.104.254
HOST0_GATEWAY_IF=default
HOST0_GATEWAY_IP=123.102.104.216
HOST0_IPMASQ=NO
HOST0_IPMASQ_IF=default
########################################################################
####
# Networks
########################################################################
####
NET0_NETADDR=192.168.1.0 #computer A = 192.168.1.10 attached to eth0
NET0_NETMASK=255.255.255.0 #instead of a single comp soon a hub/switch
will be connected to eth0
NET0_GATEWAY_IF=default
NET0_GATEWAY_IP=default #is these write?
NET0_IPMASQ=NO
NET0_IPMASQ_IF=$IF0_IFNAME
NET1_NETADDR=192.168.2.0 #computer A = 192.168.2.10 attached to eth0
NET1_NETMASK=255.255.255.0 #instead of a single comp soon a hub/switch
will be connected
NET1_GATEWAY_IF=default
NET1_GATEWAY_IP=default
NET1_IPMASQ=NO
NET1_IPMASQ_IF=default
NET2_NETADDR=192.168.3.0 #computer C = 192.168.3.10 attached to eth0
NET2_NETMASK=255.255.255.0 #instead of a single comp soon a hub/switch
will be connected
NET2_GATEWAY_IF=default
NET2_GATEWAY_IP=default
NET2_IPMASQ=NO
NET2_IPMASQ_IF=$IF2_IFNAME
NET4_NETADDR=192.168.4.0 #computer D = 192.168.4.10 attached to eth0
NET4_NETMASK=255.255.255.0 #instead of a single comp soon a hub/switch
will be connected
NET4_GATEWAY_IF=default
NET4_GATEWAY_IP=default
NET4_IPMASQ=NO
NET4_IPMASQ_IF=default
########################################################################
####
# Gateways (Default Routes)
########################################################################
####
#GW0_IPADDR=123.102.104.254
GW0_IFNAME=eth0
GW0_METRIC=1
########################################################################
####
# Port Fowarding
########################################################################
####
# what should i do with it .i am solely interested in router right
nowand just router .
#should i use port forwarding
#PF0_IFNAME=$IF0_IFNAME #MASQ IP address of external IP Address
#PF0_DESTIP=192.168.1.210 #One internal web server
#PF0_TPORTS=80:80,21:21,20:20 #TCP/IP ports for web and ftp services
#PF0_UPORTS=53:5353 #None of the services I 'serv' use UDP
#PF1_IFNAME=$IF0_IFNAME #MASQ IP address of external IP Address
#I have a single 'live' IP Address
#PF1_DESTIP=192.168.1.200 #Mail server is seperate from web/ftp
server.
#PF1_TPORTS=25:25 #TCP/IP ports for SMTP services
#PF1_UPORTS= #None of the services I 'serv' use UDP
########################################################################
####
# Hostname Requires:
CONFIG_HOSTNAME=YES
########################################################################
####
HOSTNAME=condor
########################################################################
####
# Hosts file (Static domainname entires) Requires:
CONFIG_HOSTSFILE=YES
########################################################################
####
# IP FQDN hostname alias1
alias2..
HOSTS0="$IF0_IPADDR $HOSTNAME.yourdomain.org $HOSTNAME t"
HOSTS1="192.168.1.210 server01.yourdomain.org"
HOSTS2="192.168.1.200 server02.yourdomain.org"
HOSTS3="192.168.1.105 client01.yourdomain.org"
########################################################################
####
# Domain Search Order and Name Servers Requires: CONFIG_DNS=YES
########################################################################
####
DOMAINS="yourdomain.org yourotherdomain.net"
DNS0=206.13.28.12
DNS1=206.13.31.12
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
