Hi There,
Actually I was also interested in only needing 2 ethernet cards as
the scripts that I have seen seem to need 3.
I also wanted to not use masqurading on the 192.168.x.x at all and
just be allowed to let let my machines behind the firewall keep their
existing static IP's but still be behind the firewall.
I will look over the information that you have sent me.
Thanks again,
Lonnie
> If I follow you correctly, you are looking to put the old
> machines in the DMZ (on eth2), in order to preserve their current
> IP addresses. I am running a Proxy ARP setup using the
> Eigerstein2Beta distro, with modified scripts from the LRP-CD
> distro (the only one advertised to work with Proxy ARP).
>
> I am not aware of a complete distro for this setup --- if there
> was one, I wouldn't have needed to build my "by hand." In any
> event, I don't believe you have much to worry about when it comes
> to masquerading on eth2. There is a dab masq functionality for
> UDP services built into the DMZ scripts, but that is easy enough
> to disable, as Charles spelled out here:
> http://www.geocrawler.com/archives/3/7325/2001/6/350/5991180/
>
> Scroll thru that message, to the part that starts "I think I know
> hy...." ---- because he _did_ :)
>
> That will turn off the udp masq leaving you with a DMZ that is
> controlled by only the settings in your DMZ_OPEN_DEST section.
>
> FWIW, I was a rank noob to not only LRP, but *nix in general when
> I undertook this, and an *I* got it working without
> </subjective=on> too much </subjective=off> trouble. :)
>
> Good luck,
>
> Dan
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Lonnie
> Cumberland
> Sent: Thursday, July 12, 2001 10:39 AM
> To: [EMAIL PROTECTED]
> Subject: [Leaf-user] EigerStein DMZ v1.1 Proxy ARP installation
>
>
> Hello All,
>
> I have been looking at the EigerStein DMZ v1.1 Proxy ARP
> installation
> and am trying to find a completed distrabution that does not have
> the
> masqurading ethernet 2 card stuff in the scripts.
>
> does anyone have a complete distribution that I could get with
> just the DMZ Proxy-ARP or some information on where to locate the
> scripts that I need.
>
> I am currently using the static version of the Eigersten LRP
> which has masqurading and works very well along with being very
> easy to install. I now have a need for the Proxy-ARP version
> because I will be
> installing an LRP that will allow the existing computers to keep
> there OLD static IP's
>
> Any ideas would be helpful?
> Thanks again,
> Lonnie
>
> --
> Lonnie Cumberland
> OutStep Technologies Incorporated
>
> TEL:(313) 832-7366
> FAX:(313) 832-7366
>
> URL: http://www.outstep.com
>
> EMAIL: [EMAIL PROTECTED]
> : [EMAIL PROTECTED]
>
>
> _______________________________________________
> Leaf-user mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/leaf-user
>
>
> _______________________________________________
> Leaf-user mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/leaf-user
--
Lonnie Cumberland
OutStep Technologies Incorporated
TEL:(313) 832-7366
FAX:(313) 832-7366
URL: http://www.outstep.com
EMAIL: [EMAIL PROTECTED]
: [EMAIL PROTECTED]
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
