Hi,
> M8d wrote:
>
> i have been trying to get all the packages working before i burn a cd
> image... and i was trying to setup the lrpStat on Eiger2Beta... after i
> install this then i can go to the Netmon.html on the lrp server and it
> loads up correctly but there is never any data being displayed... maybe i
> have some settings like the ownership of the files wrong.....i dont know
> but i followed these directions for setting it up:
>
> http://nw-hoosier.dyndns.org/rlohman/linux/eiger-cfg-lrpstat.html
First of all, you should probably go to http://lrp.hejl.de or
http://leaf.sf.net/devel/hejl and get the current version of lrpStat
(0.10Beta), if you didn't upgrade already. Version 0.6 that's on the page
you mentioned is rather old.
Then, the howto fails to mention that you should probably do a "chmod 755
/sbin/stat.sh" (or at least check to see if the file has the executable bit
set). If you didn't reboot somewhere along the way, you'll need to send a
SIGHUP to inetd after you changed /etc/inetd.conf. I'm not quite sure what
has to be done to ensure that the change in the hosts.allow file will take
effect - the "sure way" would be to reboot at the end of the whole setting
up process. (Everybody: what has to be done to "activate" changes in
/etc/hosts.allow without needing to reboot?).
You also failed to mention if you modified the Netmon.html file to match
your network devices (even though that shouldn't cause what you describe, at
least eth0 should display some data).
If that doesn't help, please try the suggestions mentioned on
http://leaf.sf.net/devel/hejl/troubleshooting.html especially connecting to
port 60183 using telnet to see if any data is gathered and sent to the
client at all.
I hope that helps. Don't hesitate to contact me directly if lrpStat doesn't
work, preferably with the information stated on the troubleshooting page
mentioned above.
Martin
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
