I'm sorry about the ppp question, I guess that was pretty obvious. I was asking about the routing problem so I just added it. Now there's a new problem, I think I now what it is, but not how to solve it. How do I get PPPD to run (add it to inittab(and how)??) where do I put it and with what parameters? My modem's IP is 10.0.0.138, it's an ADSL modem(512kb/s downstream; 64kb/s upstream) if you need anymore info, mail me. About the manually adding routes, here's my network.conf, I hope you can find anything in it: ############################################################################### # Auto configuration bypass (Say NO to use this file) ############################################################################### DIRECT_SETTINGS_ONLY=NO ############################################################################### # Default Settings ############################################################################### VERBOSE=YES MAX_LOOP=2 DHCP_SLEEP=15 IPFWDING_KERNEL=YES IPFWDING_FW=YES IPMASQ_DLOOSE=NO CONFIG_HOSTNAME=YES CONFIG_HOSTSFILE=NO CONFIG_DNS=YES ############################################################################### # Interfaces ############################################################################### IF0_IFNAME=eth0 IF0_IPADDR=10.0.0.150 IF0_NETMASK=255.255.255.0 IF0_BROADCAST=10.0.0.255 IF0_IP_SPOOF=YES IF1_IFNAME=eth1 IF1_IPADDR=192.168.0.150 IF1_NETMASK=255.255.255.0 IF1_BROADCAST=192.168.0.255 IF1_IP_SPOOF=YES #IF2_IFNAME=eth1:0 IF2_IPADDR=192.168.0.1 IF2_NETMASK=$IF1_NETMASK IF2_BROADCAST=$IF1_BROADCAST IF2_IP_SPOOF=NO ############################################################################### # Hosts ############################################################################### #HOST0_IPADDR=192.168.7.123 HOST0_GATEWAY_IF=default HOST0_GATEWAY_IP=192.168.1.200 HOST0_IPMASQ=NO HOST0_IPMASQ_IF=default ############################################################################### # Networks ############################################################################### NET0_NETADDR=10.0.0.0 NET0_NETMASK=255.255.255.0 NET0_GATEWAY_IF=default NET0_GATEWAY_IP=default NET0_IPMASQ=YES NET0_IPMASQ_IF=default NET1_NETADDR=192.168.0.0 NET1_NETMASK=255.255.255.0 NET1_GATEWAY_IF=default NET1_GATEWAY_IP=default NET1_IPMASQ=YES NET1_IPMASQ_IF=default ############################################################################### # Gateways (Default Routes) ############################################################################### GW0_IPADDR=10.0.0.138 GW0_IFNAME=$IF0_NAME GW0_METRIC=1 ############################################################################### # Port Fowarding ############################################################################### #PF0_IFNAME=$IF0_IFNAME PF0_DESTIP=192.168.0.10 PF0_TPORTS=53:5353,80:80,25:25,110:110,21:21,20:20,22:22 PF0_UPORTS=53:5353 ############################################################################### # Hostname Requires: CONFIG_HOSTNAME=YES ############################################################################### HOSTNAME=Tux-Guard ############################################################################### # Hosts file (Static domainname entires) Requires: CONFIG_HOSTSFILE=YES ############################################################################### # IP FQDN hostname alias1 alias2.. HOSTS0="$IF1_IPADDR $HOSTNAME.psychosis.com $HOSTNAME t" ############################################################################### # Domain Search Order and Name Servers Requires: CONFIG_DNS=YES ############################################################################### DOMAINS="xs4all.nl" DNS0=194.109.6.66 DNS1=194.109.9.99 ############################################################################### # Brief instructions for this file ############################################################################### # # DIRECT_SETTINGS_ONLY=(YES/NO) Default: YES # Bypass automatic configuration using this file's settings, # and only execute the commands in /etc/network_direct.conf # # VERBOSE=(YES/NO) Default: Yes # Be verbose about settings. # # MAX_LOOP=(int) Default: 10 # Maximum number of incrementable entries to search for. # IE: If you create a DNS7=, and MAX_LOOP=7, it will not be reached. # (DNS0 - DNS7 == 8 entires) # Setting this value too high will decrease the speed of the configuation # system. # # IPFWDING_KERNEL=(YES/NO) Default: NO # Enable IP forwarding in the kernel. # # IPFWDING_FW=(YES/NO) Default: NO # Set firewall forwarding policy to 'allow'. # # CONFIG_HOSTNAME=(YES/NO) Default: NO # Create /etc/hostname file using HOSTNAME entry. # Any current hostname file will be **OVERWRITTEN** # # CONFIG_HOSTSFILE=(YES/NO) Default: NO # Create /etc/hosts file using HOSTSx entries. # Any current hosts file will be **OVERWRITTEN** # # CONFIG_DNS=(YES/NO) Default: NO # Create /etc/resolv.conf file using DOMAINS and DNSx entries. # Any current resolv.conf file will be **OVERWRITTEN** # If you use dhcpc, let dhclient handle DNS configuration. # ############################################################################### # End ############################################################################### -- Original Message -- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED],[EMAIL PROTECTED] Send: 2001-09-08 Subject: [LRP] PPP problems I'm running (or at least trying to run)LRP 2.9.8 with the 2.0.36 kernel on a 486. I recently encountered the following problems: 1] each time I boot my machine I have to bring up my NIC's manually and manually add to the routing tables (why did I fill in my network.conf?). I have to use: # ifconfig eth0 10.0.0.150 netmask 255.255.255.0 broadcast 10.0.0.255 # ifconfig eth0 up # route add -net 10.0.0.0 netmask 255.255.255.0 eth0 2] when I try to log on to my ADSL provider with # /usr/sbin/pptp 10.0.0.138 file /etc/ppp/options.adsl I get an error message saying: Can't read from /etc/pptp.conf, defaulting to 'pc1' ioctl(TIOCSETD(PPP)): Invalid argument(22) /usr/sbin/pppd: this system lacks kernel support for PPP. This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration. If PPP was included as a module, try '/sbin/modprobe -v ppp'. If that fails, check t. So, how do I get LRP to use 'network.conf' and how do I add PPP support to the kernel? Thanks, bartosz P.S. how do I add the patches found on the www.linuxrouter.org site? _______________________________________________ linux-router maillist - [EMAIL PROTECTED] http://www.linuxrouter.org/mailman/listinfo/linux-router _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user