Well, maybe listen-only BGP would help (see zebra.lrp), but probably
not since you're still doing NAT and it will hose TCP communications if
half the packets are masq'ed with one IP and the other half are masq'ed
with the other IP. Not to mention that I still haven't been able to
get any Linux box to masq on two different external interfaces --
masq'ing N internal interfaces behind a single external works, but
multiple externals doesn't for me.

The problem is that when you have two circuits to two totally different
networks, the router has to send the traffic belonging to a given
session on one or the other pipe in order to avoid breaking a lot of
assumptions -- unless you're doing NAT before it even gets to your
LRP... hmm, just thought of that...

                     -> Cable
LAN <-> NAT <-> LRP <
                     -> DSL

Now the LRP can safely round-robin its two external circuits without
breaking anything. All you need to make that happen is equal-cost
multipath routing, which is explained nicely in the Advanced Networking
HOWTO on www.linuxdocs.org.

Man, I'll have to try this myself after the kids go to bed :-)

Jack


On Sat, 15 Sep 2001, David McBride wrote:

> Is there another floppy distro of Linux that can do this in a better way?
>
> Thanks,
> David
>
>
>
> -----Original Message-----
> From: Jack Coates [mailto:[EMAIL PROTECTED]]
> Sent: Friday, September 14, 2001 10:12 PM
> To: David McBride
> Cc: LEAF list (E-mail)
> Subject: Re: [Leaf-user] DSL and Cable combination question
>
>
> On Fri, 14 Sep 2001, David McBride wrote:
>
> > I am new to LEAF.  I would like to combine DSL and Cable into a single
> > bandwidth.  I have a Pentium 100 with 32 MB and 3 NICs.  One KNE110 and
> two
> > SMC 1211TX.  I downloaded and created a LEAF disk from LEAF website.  File
> > Eigerstein_img_eigerstien.exe 2.2.16 Kernel.  I have read some of the
> > documentation.  I dont really understand it.  I would like some advice on
> > what direction to go.  Should I use static floating routes or do I need to
> > install an aditional module on my LEAF disk.  I can do basic stuff like
> > install modules and nic drivers.  I dont need firewall support, so I think
> > all I have to do is change that line in network.conf IPFILTER_SWITCH to
> > =none.  Not sure what else I need to do.
> >
> > Thanks for the help,
> > David
> >
> > _______________________________________________
> > Leaf-user mailing list
> > [EMAIL PROTECTED]
> > https://lists.sourceforge.net/lists/listinfo/leaf-user
> >
>
> Static floating routes is the closest you'll get to what you want -- if
> you direct some of your internal machines to one path and some of them
> to the other.
>
>

-- 
Jack Coates
Monkeynoodle: A Scientific Venture...


_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user

Reply via email to