On Fri, 19 Oct 2001, Brock Nanson wrote: > Hello all, > > I'm glad to be able to report that I've got the Linux Router Project > Eiger-Wavelan package modified and running with a Breezecom PCD wireless > card providing the connection to my ISP. In the end I swapped all > occurrences of 'eth0' with 'eth1' in network.conf to get around the load > order problem. Not sure if that introduces any other problems...? > > The question I have now relates to a glitch in the operation of this > firewall/router. After a period of traffic, I see messages from the > breezecom card or module - "Busy: TX queue full", generally repeated several > times. Eventually this causes the traffic to stop until a 'network reload' > is performed. Can anyone suggest where to start on this? Do I need to go > into the QoS section and have it running? I know absolutely nothing about > that portion of network.conf!! > > Thanks, > > Brock Nanson >
Sounds like the device is having trouble communicating with the other side; the best thing to do is to correct that problem (interference, or whatever). But if you want to use QoS as a workaround or permanent solution if the other problem doesn't go away, try the QoS HOWTO at http://www.monkeynoodle.org/lrp/LRP-QoS-HOWTO.html -- I believe you won't need to worry about the kernel recompiliation I did, Charles has made modules for his kernel available since then. -- Jack Coates Monkeynoodle: A Scientific Venture... _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user