LLLLLong delay - original post was in Sept
I need to open UDP post 4000 to 4256 Thanks Scott and Stephen for your responses. It sounds like I have a choice for opening the ports EXTERN_UDP_PORTS="0/0_4000:4256" or ipchains -A input -s 0.0.0.0/0 -d $IP_EXT/32 40000:40256 -p udp -j ACCEPT Then use ipmasqadm autofw -A -r udp 40000 40256 -h $MASQD_HOST to redirect the data back to the original machine. I know were to find the EXTERN_UDP_PORTS line in network.conf but it is unclear to me were to put the other commands. Is there a trick to seaching the Geocrawler Archive or does it just not work? Or is it Me? Thanks Jason ------------------------------------------------------------- Doesn't Charles' script allow you to do something like: EXTERN_UDP_PORTS="0/0_40000:40256" in network.conf? If you need to portforward them as well then, as Scott says, the ipmasqadm line below is needed. Stephen > Jason: > > Heya. I hadn't seen a reply to your post yet, probably > because your question was a bit scary. :) Asking how to open > 40,000 UDP ports on a LEAF list would be like asking "how can > I be sure to poison myself?" on a medical self-help list. :) > Anyhow. Presuming you meant to open only 256 ports, > starting at port 40000, it's easily done with just two commands. > First, you need to open the ports on the external side of the > firewall: > > ipchains -A input -s 0.0.0.0/0 -d $IP_EXT/32 40000:40256 -p udp -j > ACCEPT > > Secondly, I presume you want to pass the data arriving > at those ports along to an internal, MASQ'd server. Do that with: > > ipmasqadm autofw -A -r udp 40000 40256 -h $MASQD_HOST > > This range is similar to that used by TeamSound (a voice > conferencing service targeted at game players) though it needs TCP port > 40000 treated similarly. > Hope this helps! > > cheers, > Scott > > I need to open UDP ports 4000 to 40256. I am using Charles' Dynamic > IP. = I read that the way to do this is to enter each individual port > to be = opened. As you can Imagine It was a very long line. After > carefully = typing it all in it complained while booting and would not > fully boot. = Is there a better way. > > Thanks > Crosseyed _______________________________________________ Leaf-user mailing list <EMAIL: PROTECTED> https://lists.sourceforge.net/lists/listinfo/leaf-user _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
