> 5. Dachstein + port-forwarded DMZ (SH) > > Message: 5 > From: "SH" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Date: Tue, 4 Dec 2001 00:00:33 +0100 > Subject: [Leaf-user] Dachstein + port-forwarded DMZ > > Hi guys, > > The recent months I have been running E2B, then Dachstein RC2, without > any problems whatsoever. My setup is what I would guess pretty > conventional; A P100 with 2 NICs on a static DSL line. > > Yesterday I decided to add a another NIC to set up a port-forwarded > DMZ. When doing that, I rearranged the NICs so that eth0 is a 10Mbit > 3Com card, and the two internal interfaces uses a couple of Realtek > 8139c 100Mbit cards. I continued to load the appropriate drivers for > each NIC, and all of them now show up during the boot process. My > problem is that DHCP no longer works (message: "No subnet declaration > for eth1 > (0.0.0.0)"), pinging to the outside world does not work, and none of > the machines on the subnets can ping the firewall. In other words, > nothing works.. :-) > > I guess something is wrong in my network.conf. What settings should be > changed to allow such a configuration? Is there a HOWTO/FAQ on this > topic? > > > Svein H. >
you did not say which NIC you added, but i am going to guess it was one of the realteks. I had a problem with them when i moved to dachstien 1.0.1 look at the module config file and check the NE.o module line it should have an Io address for both cards "0x300,0x240" with mine the second one was wrong Wayne _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
