> I abandoned Eiger and now have attempted Dachstein. I am a little confused > by the error message I am getting. > > "No subnet declaration for 'eth1' (0.0.0.0). Please write a subnet > declaration in your dhcpd.conf file for the network segment to which eht1 is > attached." > > I've reviewed the file and am uncertain how to write this subnet > declaration. The help file suggests that I may need to edit > /etc/init.d/dhcpcd as well. > > I've tried various changes to be sure that all the hardware is working. I > am at a loss for how to edit the files. > > I would appreciate any help I can get on this. Thank you.
If you're just starting with a Dachstein image, this error indicates your internal network card is not configured. You probably need to load the proper kernel module for your network card(s). Edit /etc/modules to control which modules to load. If you're lucky, the module(s) you need will already be on the disk. If not, you'll have to download them and add them to your floppy. More detailed directions are available in the readme file on the floppy. You can find out which kernel module your network cards require from section 4 of the linux Ethernet-HOWTO: http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO.html Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
