Eddie Wilson wrote:
>Any progress on the wanpipe? I have not seen anything new at Sangoma except in the
>custom folder.
>
As mentioned in a previous message, I have put together a new
wanpipe.lrp based on the Sangoma
linux/custom/m_schleif/wanpipe-2.2.3-lrp-v2.tar.gz tarball. With it, the
modules install correctly and after issuing a
wanconfig card wanpipe1 start
the device shows up (default config file). Even in the 'ip addr sh'
command. It even got the address I assigned to it in network.conf! And
it responds to an 'ip link set wp1_ppp up' command. So everything seems
to work.
I just noticed that there's a newer version - v3- available on the site.
Changelogs indicate that the only thing that changed was to rebuild the
modules for the 2.2.19-3 kernel... However, I'm working with this kernel:
fw2: -root-
# uname -a
Linux fw2 2.2.19 #3 Tue Nov 20 03:49:20 CET 2001 i386 unknown
I could not yet test it out on an actually working link, since I don't
have a LL. I will do this at my customer's site sunday night. In the
mean time, if you're interested to try out my lrp file, just mail me...
I'll keep you posted.
Robert
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
