I have an OS/2 Firewall I am currently trying to convert to a Dachstein v.1.0.2 box.
It has (2) NE2000 compliant ISA cards.
I uncomment the 8390 and the appropriate modules with the IO address set to 300, 340
I need a static Outside IP because it is actually the inside address of my DMZ.
So set it with 192.168.16.2/24
The cards are the same as is the driver.
I can ping both cards from the Dachstein box.
I can ping the internal network (192.168.1.1-199 assigned by DHCP from the Dachstein box) from the Dachstein box.
I can ping the internal card (192.168.1.1) from the internal network.
I can ping through to the external card (192.168.16.2) from the internal network.
I CAN NOT ping past the external card either from the Dachstein box or the internal network.
I CAN NOT telnet on any port past the external card either from the Dachstein box or the internal network, so it is not just ICMP.
The error is NOT a network unreachable error, and I think the IP is configured right.
The response from the failed ping says not permitted.
I do not think it is a driver or card config issue, because I switched the IO addresses and the same thing happened with opposite cards(had to swap the cables of course).
Could it be a default firewall config that denies everything. The docs say it should be set to be a masq firewall "out of the box".
Thank you in advance for your help. And if I missed a similar post, please forgive me I did look for a long time.
Jason Massey