Charles Does this work with the Eiger release? Can I add ROUTE into the eval local section of network.conf?
Regards Shane -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Charles Steinkuehler Sent: 07 January 2002 04:48 To: Sergio Morilla; Leaf-user@lists. sourceforge. net (E-mail) Subject: Re: [Leaf-user] Additional reoutes - Where? I have a DCD 1.02 router running just perfect!! I needed to add aditional routes. So far I managed to get them working adding the following statement on network.con in the if_up() function just prior to return 0 (My router is 192.168.1.250) ip route add 192.168.2/24 via 192.168.1.254 ip route add 192.168.3/24 via 192.168.1.254 I have this setting working. Is there a better place to set this routes?? Any Thoughts?? Add them to ethN_ROUTES, where ethN is the appropriate ethernet interface: ethN_ROUTES="192.168.2/24_via_192.168.1.254 192.168.3/24_via_192.168.1.254" Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user ***************************************************************** Disclaimer and confidentiality note This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
