I am attempting to install Dachstein (floppy-based install) on a P166 w/ 64mb Ram.
I am using two AOpen AON-325 NIC's. I have eth0 connected to my cable modem (ISP is cableone.net) I have eth1 connected to my hub Also connected to the hub is a XP box (I will be adding a RH 7.1 box soon, in case it matters). I have gotten the floppy setup, installed the appropriate module for my NIC's (rtl8139.o), and have had limited success. Dachstein appears to be setting up my clients correctly via DHCP, as they are assigned the correct IP, Gateway, etc. >From the client (XP) I can ping the LRP box. From the LRP box, I cannot ping the XP >box (192.168.1.1), it just doesn't return any results. I also cannot ping out. Attempting to ping out results in a error that says "not allowed". Needless to say, I cannot connect to the internet via the client box. I am also a little curious, as the eth0 IP is set at 10.... , where as my dhcp assigned IP from the ISP is normally a 24.116.36. Any help would be greatly appreciated. Being that I am using a local ISP, I have not been able to find much in the way of others experiences using LRP w/ this ISP. The ISP says that I should just be able to connect a router and share the service. Thanks!!!! Sincerely, Justin Pease N u a n c e N i n e Web Usability, Development and Design www.nuance9.com _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
