Very True Gregor! I might also add that the default backup is "full" and "cdrom" so I had to go to each section I wanted to back up and change them from "full" "cdrom" to "partial" "floppy". There is a "letter switch" for all three options, 1. backup itself, 2. change destination, and 3. change type of backup (full or partial). The correct sequence for a package to back up would be to change the destination (floppy) type (partial) then follow up with the backup which will write to the floppy.
I take it you were successful in getting the modules you wanted to load on the floppy in the lprcfg.cfg file. R- Bill --- GREGOR <[EMAIL PROTECTED]> wrote: > Craig Caughlin writes: > > > Hi folks, > > I'm using the Dachstein CD, and I've uncommented > the correct entries for my > > NIC's. I just don't know how to backup to the > floppy (I'm sorry, I'm fairly > > > I assume that you're using DCD. if you are already > in the LRP-configuration > menu, type b to choose Back-up ramdisk. > since NIC's settings is in 2) etc, so now type d 2. > and then type 2 to > choose fd0 as the back up destination. don't forget > to insert a DOS > formatted floppy into your floppy drive. > > and finally type b 2 to do the back up. when a > question appears, just pres > Y. if the back up is finished, you will then type q > until you enter the > command prompt. > in the command prompt type svi network reload, so > that your changes take > effect. > > > regards, > Gregor > __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
