> I'm actually using your Eiger static (but have it running off a HDD etc, > I'm also running with "some" parts taken from your extended scripts). > Will I be able to setup the same with this or will have to move over to the > Dachstein build?
There is some support for static NAT in Eiger, depending on which version of the extended scripts you're using. The Dachstein scripts are substantially cleaned up supersets of the Eiger extended scripts. Proxy-arp support in particular is much improved, and I think there were some static-NAT enhancements to the firewall rules as well... > Also when I was building this I used your full extended scripts and found I > could not ping any of the aliased IP's on eth0, (and you allowed with > #EXTERN_ICMP_PORT0="0/0 : 1.2.3.12" to activiate ICMP to that IP which > worked fine) > I'm just wondering what line(s) in the ipfilter.conf configured this, as I > was comparing the standard ipfilter.conf with the one from the extended > scripts but couldn't find the difference. # Open ICMP ports (for aliased external addresses) walk_list EXTERN_ICMP_PORT $INIT_INDEX open_port icmp $EXTERN_IF $EXTERN_IP Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
