No there is no pci-san.o in Bering mdoules area. pci-san is being used by drivers written by Donald Becker and available at: http://www.scyld.com/page/support/network/ Those are not part of the "standard" linux kernel even though they are really well designed. I am considering to compile them separatly for the next Bering release. Jacques
http://leaf.sourceforge.net/devel/jnilo ----- Original Message ----- From: "Luis.F.Correia" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 04, 2002 6:36 PM Subject: FW: [Leaf-user] Bering PCI ethernet card module Jacques, in fact there is no pci-scan.o on the Bering modules area. Is this right? -----Original Message----- From: Gufler Markus [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 04, 2002 4:51 PM To: 'Luis.F.Correia' Subject: RE: [Leaf-user] Bering PCI ethernet card module Where can I find the pci-scan.o f�r Bering? On the Dachstein-Download-Directory there is a via-rhine.o (13 kb) and a pci-scan.o (5 kb) There is also a note in the FAQs that the redundant code for every net-module was extracted and now called pci-scan.o The via-rhine.o on the Bering-download-directory has 18 kb and sou i thougt it is a file with the pci-scan-code included. I also tried to download the Dachstein-pci-scan.o, copied it in the Bering-/lib/modules-Directory. Now the system hangs during the reboot. After a restore of the entire modules-lrp the system works again, but without my ethernet-cards... :-( Markus > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > Luis.F.Correia > Sent: Thursday, April 04, 2002 4:17 PM > To: [EMAIL PROTECTED] > Subject: RE: [Leaf-user] Bering PCI ethernet card module > > > Maybe I'm wrong, but that card may need 'pci-scan.o' also. > > I'll have to check dependancies. > > Meanwhile, please download also from the web site the 'pci-scan.o' and > add it to /lib/modules, and add a line before "via-rhine" in "lrcfg > > Packages conf. > Modules > Modules" > > Backup and reboot to test. > > -----Original Message----- > From: Gufler Markus [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 04, 2002 2:50 PM > To: [EMAIL PROTECTED] > Subject: [Leaf-user] Bering PCI ethernet card module > > > Hi list, > > I've tried the latest Bering release on a machine that just works with > Dachstein. > > I've downloaded the Bering-Module for my Ethernet card (via-rhine.o) > copied them to /lib/modules added a line "via-rhine" in "lrcfg > > Packages conf. > Modules > Modules" and backed it up to the floppy. > > But now the system cannot find the ethernet cards...? > > In the syslog-file i can see > > PCI: PCI Bios ... > PCI: Using conf. Type 1 > PCI: Probing PCI Hardware > Limiting direct PCI/PCI transfers > > But there are no other messages as they are on the Dachstein-system > indicating that PCI-cards was found... > > Any suggestions? > > Markus > > > _______________________________________________ > Leaf-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > > _______________________________________________ > Leaf-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > > _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
