CS> Forgot to include LEAF list in previous reply... ----- Original Message ----- From: "Rein Inge Hoff" <[EMAIL PROTECTED]> To: "Charles Steinkuehler" <[EMAIL PROTECTED]> Sent: Tuesday, April 23, 2002 7:27 AM Subject: Re: [Leaf-user] VPN tunnel up, but can't reach other subnet
Hi Charles, I am still not able to operate with this setup. I have tried all the things you and others have suggested but with no luck. Below the latest email I received from you is the output from "ipsec barf". Do you see any errors or misconfigurations here? Thanks alot for the help so far. CS> I don't really see anything wrong. At first, I thought you were missing the [left|right]nexthop settings, but then I noticed that's because you're running both endpoints on the same subnet. About the only thing I can suggest to try is removing the default and opportunistic connection entries, so you have a single connection entry for the tunnel you're trying to build. If that doesn't help, you'll probably have to post your barf to the FreeS/WAN list, where there are hopefully more knowledgable folks...I'm not exactly an IPSec guru, I just got the code running on LEAF, and managed to get a few tunnels up & running. CS> I also notice you're setting "auto=add". You realize this means you'll have to manually start the connection (using ipsec auto --up <connection>) from one end or the other, right? If you want the connection to start automatically, use "auto=start". Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user