Matt, Have done this on Eigerstein, the mgetty.lrp was a bit tricky to find, but ppp was suitable as it was on the version of Eiger I had, it works wonderfully. Email me offline for mgetty if you want it, I would see no reason why it will not work on most distributions.
Matthew > Actually, the instructions for 2.9.4 aren't too far off - I used what I > had set up 2.9.4/2.9.8, and copied the ppp.lrp and mgetty.lrp directly > to Dachstein. The only real change was using the larger Dachstein > kernel that had serial support compiled in. You will probably need to > find new modules (ppp.o, slhc.o). I'd try the old pppd and mgetty to > see if they work, and if not use the same scripts but replace the > compiled parts (pppd and mgetty) with Bering versions.. Or, they might > work - don't know. > > Good Luck, > Jon French > > Matt Russell wrote: > > > > Just as the subject says, wondering if anyone has successfully setup a > > PPP server (single line) with bering rc2. Anyone know of a how-to URL? > > The only thing I could find was instructions for LRP 2.9.4, whose > > packages obviously won't work with bering. > > > > thanks, > > matt _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas - http://devcon.sprintpcs.com/adp/index.cfm?source=osdntextlink ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
