Manfred, Have the eth entries commented out and the bridge entry uncommented in /etc/network/interfaces. My poking around in if-pre-up.d/bridge has /proc/net/dev empty (or with out any eth entries). As a guess, this is because pcmcia either hasn't run or isn't finished. My gut tells me this is the root of the problem. Further poking around confirms this as I see the bridge scripts exiting before hearing the beeps (and messages) from pcmcia.
Manfred Schuler wrote: > > Mark, > > bridge configuration is done in /etc/network/interfaces. > At the end of the file is an example bridge configuration > In the bridge_ports line you list the devices you want to > bridge, normally your internal interfaces. > These devices must not be configured, so comment out the > respective lines. > Backup etc. > > In the file /etc/network/if-pre-up.d/bridge > > the line > brctl addif $IFACE $i && ip set dev $i up > should read > brctl addif $IFACE $i && ip link set dev $i up > > Change this and backup bridge. > -- Mark ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Stuff, things, and much much more. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
