i'm using bering v1.0-rc3 and have the bridging module enabled. i want to use the bridge to act as a transparent firewall between the machines i have connected to a particular switch, and the rest of the world. i've got the bridge itself working, however now i'm not sure how to write my firewall rules.
the two interfaces, eth0 and eth1, don't have any ip configuration information. they're just bound together to make the bridge (br0). do i still write firewall rules referring to the interfaces eth0 and eth1? i tried enabling the shorewall module, and allowing all traffic from the "loc" zone (eth1), the "new" zone (eth0), and the fw zone, however the bridge stops working. the only way i can get it working again is to disable the shorewall module and reboot (just stoping shorewall with "/etc/init.d/shorewall stop" doesn't do the trick). can anyone point out what i'm doing wrong? -- jacob walcik [EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
