I've now getting to some deployment scenarios after playing around with bering. I've a few doubts and would appreciate some pointers.
1. In shorewall, the FAQ/doc says that sshd should be commented in inetd for it to work. I thought it was there to make sure controls of host.deny and host.allow could apply. Why is it being commented? 2. I shut down shorewall and changed all policies to accept to first see if my services are going thro'. When I try to login thro' ssh to the bering box, the login takes almost 4 minutes to show up on the screen. My bering box is a P4 1.7Mhz with 512MB RAM! I'm sure something is wrong in the config but do not know what. 3. I tried running weblet using /usr/sbin/sh-httpd& and then did a ps. Ps shows stopped for sh-httpd (tty input). I cannot run sh-httpd as a service using svi as no entry in /etc/init.d exists. Am I wrong? I also configured weblet to accept client logins from a specified network by uncommenting that line. When I invoke sh-httpd& after this, I'm getting Exit 1 status in ps ax. Why would this be? I went back and commented that line, sh-httpd worked as earlier. 4. Will lrps from oxygen or dachenstein work on bering? Some of the lrps I need are not available on bering - wget, vrrpd etc. Mohan ------------------------------------------------------- In remembrance www.osdn.com/911/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
