I'm trying to configure my local network using the 3-Interface
DOCs on (www.shorewall.net) to setup a External, Internet, and DMZ network.
net - The Internet (eth0)
loc - Local Network (eth1)
dmz - Demilitarized Zone (eth2)
Now all traffic between (net) and (loc) work just fine. I want to
place an SMTP server on my (dmz) and have it pass all SMTP traffic back and
forth like a normal mail server. As of right now, I can't seem to get it to
work.
Network Diagram:
================
net: 216.170.101.137 (Remote ISP Router)
216.170.101.138 (IP of Bering Firewall - External - eth0)
loc: 199.74.186.200 (IP of Bering Firewall - Internal - eth1)
199.74.186.0/24 (Addresses issued via DHCP)
dmz: 10.10.10.1 (IP of Bering Firewall - DMZ - eth2)
10.10.10.2 (IP of Mail Server)
I'm assuming I need to modify the Shorewall (rules) file to
pass (net) to (dmz) SMTP Traffic and also (loc) to (dmz) SMTP Traffic but
I'm unsure on how to configure that. Could anybody give me a helping hand
on how Shorewall Configs and/or anything else need to be configured?
I've also tried the configs listed here:
http://sourceforge.net/docman/display_doc.php?docid=1452&group_id=13751
...but that didn't do much good on my Bering LRP since its a FAQ
for people configuring LRP 2.9.x or Materhorn/Eiger. Any assistance is
appreciated.
-Alby
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
