Phillip, Thanks for the pointer. I went and read the Prism2/HostAp documentation you refered to. It seems to describe two scenarios:
1. Setting up a leaf as an Access Point 2. Setting up two leafs (leaves?) as a Wireless Distribution System (a wireless link between two wired segments) Both of these scenarios is close to, but not quite, what I was trying to do. I'm really trying to accomplish the linux equivalent of the Linksys WET11. A device that will hook a wired segment to a wireless network via another access point. The other problem is that all of my cards are Cisco Aironet cards, which apparently don't support the hostap mode described as being part of the Prism chipset. Although I have read some info that hostap is present in cisco aironet cards. (http://hostap.epitest.fi/hostap/2002-07/1158.html) Is what i'm trying to do impossible without HostAP? ------------------------------------------------------- This SF.NET email is sponsored by: Geek Gift Procrastinating? Get the perfect geek gift now! Before the Holidays pass you by. T H I N K G E E K . C O M http://www.thinkgeek.com/sf/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
