Hi all,
I'm trying to set up a Linux box running the latest release of Bering
distribution .
The image file is : Bering_1.0-stable_img_bering_1680.exe
The floppy was built as explained in the installation guide and boot
works fine on an old 486 motherboard .
I modifie the keyboard in French type ( this should be done previous
all other thing for non US users !!!)
I save keyboard config and I boot again : this works fine too.
Then I put the 3c509 module ( size 13892 ) in /lib/modules anf I
initialize the file /etc/module in section "ISA Ethernet cards" and put
3c509 in place of the default value . I save all this configuration.
The probem is that during boot an error message is given at ethernet
module load time :
"unresolved symbol --out_of_line_bug"
The "insmod 3c509" give the same message
I try on many main board and I get the same result. ( one of these
machine run perfectly my NIC board under Linux Mandrake )
I try to configure ISA board by 3COM DOS utilities and by disabling PnP
mode : same result
Any information or help about this problem would be very appreciated
Thanks a lot
Jean-Francois
-------------------------------------------------------
This SF.NET email is sponsored by: Take your first step towards giving
your online business a competitive advantage. Test-drive a Thawte SSL
certificate - our easy online guide will show you how. Click here to get
started: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0027en
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
- Re: [leaf-user] 3C509 & Bering 2.4.18 Jean-Francois TESTE
- Re: [leaf-user] 3C509 & Bering 2.4.18 Brad Fritz
- Re: [leaf-user] 3C509 & Bering 2.4.18 Jean-Francois TESTE
- Re: [leaf-user] 3C509 & Bering 2.4.18 Brad Fritz