Hello,
I have the most recent WISP Dist running on a Soekris 4521 SBC. I
want to set it up as an Access Point using the host-ap drivers. No
matter what PCMCIA card I use though, it shows up as netsc0 instead of
wlan0.
For testing purposes I set it up to associate with another Access Point
I have (ap-2000) and it will associate just fine but it will not let me
ping across the wireless link (from either side). I have tried this with
two different wireless cards, a YDI Emerald card (repackaged Orinoco I
believe) and a Demarctech Prism 2.5 200mW Card (Zcom max card?) I have
tried deleting everything but the wireless entries in /etc/pcmcia/config
but it still comes up as netcs0. Any help would be greatly appreciated!
Thanks,
Tyler
-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will
allow you to extend the highest allowed 128 bit encryption to all your
clients even if they use browsers that are limited to 40 bit encryption.
Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
