On Monday 27 January 2003 06:46 pm, Chris Low wrote: > So I've connected a line from the hub to eth0 and connected eth1 to the > switch along with the rest of the LAN. > > Shouldn't this work, or do I need to do something else special to Dachstein > to bring it up & running?
As long as the NIC's and system are configured correctly and connected to the proper links, I would think so. If you run into any problems, check the FAQ's, search the "leaf-user" mailing-list archives, and then make a post to this list with all useful de-bugging information as requested per the "SR FAQ" linked at the bottom of this post! Best Wishes! -- ~Lynn Avants Linux Embedded Appliance Firewall developer http://leaf.sourceforge.net ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html