I have a feeling that your system ran out of memory. Try telnet. It is lighter on resources. If you cannot login remotely, try to login via serial cable.
You can see memory usage by running "ps auxw" and "cat /proc/meminfo". Also see what messages you have in the system log. Please let me know.
Samuel Abreu wrote:
I use wisp in all my wireless station, and for everything works just fine! But im getting a problem that i can't understand!
I got 0% of packet loss, the ping responds in 3 ms to 10 ms! very stable, the distance between the antenas are 2km!
The signal in AP Manager (The station is connected in a AP1000 of orinoco!) give 95% of signal, noise is 30% (The amplifier increase the noise! =()
Everything looks just fine! But i got just a unique problem!
When i try to log via telnet or ssh, sometimes the menu is ok, other times it don't show complete, then i get no response from the station, i have to kill the telnet session and start other! that happens a lot! Now i have a station, that the menu don't appears at all, the cursor stay in the top of the screen, without blanking, and always get that response, i just can't log-in in the station remotely! =(
The version of wisp is 2397, and i have only 2 station with that version, one is just fine, but the one who have problem is with bridge active!
-- Best Regards, Vladimir Systems Engineer (RHCE)
------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
