Did anyone have a solution to my question? Sorry to ask again, but nothing came through here...
Regards Nick -----Original Message----- From: Nick Taylor [mailto:[EMAIL PROTECTED] Sent: 25 February 2003 20:33 To: [EMAIL PROTECTED] Subject: [leaf-user] Proxy-ARP & Bering 1.1 I've managed to get Bering 1.1 running on my old 486SX, thanks to several people on this list. I have a slightly weird requirement which I've managed to do using LRP 2.9.8, but am having difficulty with Bering 1.1. My setup is as follows: ISP | | ADSL Router | 62.49.244.241 | | WAN (62.49.244.240/29) | | 62.49.244.242 (eth0) | LRP-62.49.244.254 (eth1)------ DMZ (62.49.244.248/29) | 10.0.0.200 (eth2) | | LAN (10.0.0.0/8) My ISP has assigned us 62.49.244.240/28, which I have further subnetted into: 62.49.244.240/29 and 62.49.244.248/29. As I have no control over the ADSL Router that our ISP has provided I use proxy-arp to advertise the DMZ network on the WAN interface and vice-versa. Using Shorewall, how can I achieve the equivalent to the following commands which appear to work with LRP 2.9.8, but give an error with Bering 1.1: ARP -i eth0 -Ds 62.49.244.248 eth0 netmask 255.255.255.248 pub ARP -i eth1 -Ds 62.49.244.240 eth1 netmask 255.255.255.248 pub Thanks once again, Nick ------------------------------------------------------- This SF.net email is sponsored by: Scholarships for Techies! Can't afford IT training? All 2003 ictp students receive scholarships. Get hands-on training in Microsoft, Cisco, Sun, Linux/UNIX, and more. www.ictp.com/training/sourceforge.asp ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
