I've finally figured out the PCMCIA problems, the wireless files, and a few other "missing links" for my Bering 1.2 router, and now I'm down to the wireless card.
Specs: eepro100 on eth0 orinoco gold on eth1 system booting from hd, other specs on hardware seem ok The machine comes up fine. I get two 'high beeps' from the card on initial startup. However, dhcpd doesn't work, says eth1 is 0.0.0.0 and needs to be configured. In daemon.log, I have my listing of ./network start eth1 but it never completes. If I run iwconfig it hangs the system and the easiest way to break out of it is to restart the system. If I run ./network stop eth1 then run iwconfig, I get the 'no wireless extensions' error, but eth1 does show up. running ./network start eth1 I get an 'operation not supported by device'. If I rmmod, then insmod, orinoco_cs and re-run ./network start eth0, it comes up with an IP address in ifconfig but it doesn't actually send a radio signal. I'm using a 'bare' wireless.opts file, BTW. Even after that, I still can't run iwconfig eth1, it just hangs. I don't know what I did wrong. Has anyone else run into this? Dave __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
