Hello, >eth2 IEEE 802.11-DS ESSID:"" Nickname:"HERMES I" >Mode:Managed Frequency:2.422GHz Access Point: 00:00:00:00:00:00 >Bit Rate:11Mb/s Tx-Power=15 dBm Sensitivity:1/3 >Retry limit:4 RTS thr:off Fragment thr:off >Encryption key:off >Power Management:off >Link Quality:0/92 Signal level:134/153 Noise level:134/153 >Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This shows that your wireless settings were not implemented properly. You can try manually setting the ESSID and MODE of your wireless card using 'iwconfig'. Once working, and I'm positive it will, you can double check what went wrong with your Bering conf settings/scripts. HTH - Vic ------------------------------------------------- Message: 8 Date: Mon, 14 Jul 2003 14:41:58 -0500 From: Homer Parker <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Organization: Homer's Hut Subject: [leaf-user] essid and ip problem --CSxC6xdV,f/g=.,Y Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Bering 1.2, Orinoco silver cards in a Soekris Net 4501 box.. Having a problem getting the essid to work, and get an ip assigned to the radio :( Here's what I have: [SNIPPED] When I restart the pcmcia service, it looks as if it loads ok, no errors, and I get the single solid light on the radio that I would expect.. I have the other end of the link to configure yet, so I'm not sure if it is associating or not.. ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
