Huh?? You need to format the usb device? I have seen bits and pieces about formatting cf cards on ide adapters but nothing on usb. I put a bunch of *.lrp on the device so I guess it is formatted. I can read it from Windows.
There is no /usb directory, does it get created or do I need to create it? Thanks, ----- Original Message ----- From: "Erich Titl" <[EMAIL PROTECTED]> To: "ALParada" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, May 06, 2004 2:29 AM Subject: Re: [leaf-user] Can't mount usb flash drive At 00:34 06.05.2004 -0400, ALParada wrote: >Hello Everyone, > >Trying to mount a usb flash drive with little luck. I have added the usb and >scsi files to lib/modules and etc/modules. I see the device under >/proc/bus/usb/devices and I see no errors under /var/log/messages. It seems >to be picked up and assigned but when I try to mount it I get "Mounting >/dev/sdaX on /usb failed: No such file or directory". Any ideas? - Do you have a /usb directory? - Is the USB drive formatted? HTH Erich THINK Püntenstrasse 39 8143 Stallikon mailto:[EMAIL PROTECTED] PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16 ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
