Hello,
Exactly how do you add mutiple ip addresses to the same interface? I tried
adding this under network config/interfaces:
# Configure Interface
auto eth1
iface eth1 inet static
address 192.168.1.155
netmask 255.255.255.0
broadcast 192.168.1.0
gateway 192.168.1.1
auto eth1:0
iface eth1 inet static
address 192.168.2.155
netmask 255.255.255.0
broadcast 192.168.2.0
When I restarted networking I had lost all my addresses. I did an "ip addr"
and they were all gone. I commented the second address and did a:
ip addr add 192.168.2.155/24 brd 192.168.1.255 dev eth0 label eth0:0
and it worked. Since I don't want to do this everytime I reboot what am I
doing wrong and how do I fix it?
TIA.
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
