I have successfully made a three interface setup with Bering uClibc consisting of eth0 to Net, eth1 for our internal network and eth2 for the DMZ. We are now moving from the office we had to a home-office where eth0 is connected to our existing ISP by DSL plus we are adding Cable internet connection to eth3.
1) I have verified that Comast and DSL work as links to the outside and as expected. 2) The rules I had under the three card network will continue to apply. Because we are using the same IP, we even get to keep our old IP addresses for the DMZ. 3) Comcast is needed as bursty, high-speed outbound access where DSL supplies fixed IP metered bandwidth. 4) I want the DMZ's default gateway to continue to be eth0. 5) I want eth1's default gateway to become eth3. 6) If eth1 happens to want to hit the DMZ, I want it to go directly to eth2 rather than out through the cable Internet and back through the DSL. Would anyone be able to point me in the right direction? Thanks! --Romaq ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
