Hi Eric,
Thanks a lot for suggestions.
I started from the original modules.lrp from CD and I copied all needed
modules to that modules.lrp. This time the madwifi modules are loaded OK. I
did not test the wireless yet but I think it should be fine.
So for some reason my old /etc/modules has been corrupted.
This time I saw 2 lines about "Debugging version" (see below) and not sure
if that's just warning or we are using debugging version
wlan - Using /lib/modules/./wlan.o
wlan: 0.8.6.0 (EXPERIMENTAL)
wlan_acl - Using /lib/modules/./wlan_acl.o
wlan: mac acl policy registered
wlan_ccmp - Using /lib/modules/./wlan_ccmp.o
wlan_tkip - Using /lib/modules/./wlan_tkip.o
wlan_wep - Using /lib/modules/./wlan_wep.o
wlan_xauth - Using /lib/modules/./wlan_xauth.o
ath_hal - Using /lib/modules/./ath_hal.o
Warning: loading ath_hal will taint the kernel: non-GPL license ath_hal:
0.9.14.9 (- Proprietary
AR5210 See http://www., AR5211tux.org/lkml/#ex, AR5212port-tainted for,
RF5111 information abo, RF5112ut tainted modul, Rs)
ath_rate_sample - Using /lib/modules/./ath_rate_sample.o
ath_rate_sample: 1.2
ath_pci - Using /lib/modules/./ath_pci.o
ath_pci: 0.9.6.0 (EXPERIMENTAL)
Build date: Aug 6 2005
Debugging version (IEEE80211)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.9 phy 4.3 radio 3.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
^^^^^^^^^^^^^^^^^^^^^^^^
----- Original Message -----
From: "Eric Spakman" <[EMAIL PROTECTED]>
To: "M Lu" <[EMAIL PROTECTED]>
Sent: Wednesday, October 26, 2005 10:51 AM
Subject: Re: [leaf-user] madwifi drivers on Bering 2.3
That's a pity, I can't see anything special in your modules file. No
strange characters or so. You could try to remove the "#" between
wlan_xauth and ath_hal, but that shouldn't be the problem.
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
