Hello all,
I posted a few months ago regarding trying to get madwifi working on my
router. It turns out the card I was using is too new and unsupported
(MIMO). I decided to go ahead and purchase a different card. I bought the
D Link DWLG520. According to the Madwifi site this card is supported. My
end goal is to use the card as an AP. It seems that my card is loading up
ok and the drivers are working but I cannot connect to it. Here is some of
the needed info-
# /etc/network/interfaces -- configuration file for LEAF network
<snip>
# Step 7 (optional): configure wireless AP (Madwifi)
auto wifi0
iface wifi0 inet static
address 192.168.3.1
netmask 255.255.255.0
broadcast 192.168.3.255
wireless-mode master
wireless-rate 54M
wireless-essid default
up /sbin/iwpriv/ ath0 mode 3
firewall# cat /proc/modules
ath_pci 56820 1
ath_rate_onoe 2900 0 [ath_pci]
ath_hal 179184 1 [ath_pci]
wlan_xauth 216 0 (unused)
wlan_tkip 8368 0 (unused)
wlan_acl 1784 0 (unused)
wlan 116530 1 [ath_pci ath_rate_onoe wlan_xauth wlan_tkip
wlan_acl]
softdog 1360 1
ipt_state 272 17
ipt_helper 400 0 (unused)
ipt_conntrack 692 0
ipt_REDIRECT 480 0 (unused)
ipt_MASQUERADE 1024 2
ip_nat_irc 1704 0 (unused)
ip_nat_ftp 2152 0 (unused)
iptable_nat 14332 3 [ipt_REDIRECT ipt_MASQUERADE ip_nat_irc
ip_nat_ftp]
ip_conntrack_irc 2484 1
ip_conntrack_ftp 3132 1
ip_conntrack 16516 2 [ipt_state ipt_helper ipt_conntrack
ipt_REDIRECT ipt_MASQUERADE ip_nat_irc ip_nat_ftp iptable_nat
ip_conntrack_irc ip_conntrack_ftp]
3c59x 23768 2
3c515 11052 1
isofs 15732 0 (unused)
ide-detect 132 0 (unused)
ide-cd 26748 0
ide-disk 11308 0
ide-core 80476 0 [ide-detect ide-cd ide-disk]
cdrom 25344 0 [ide-cd]
firewall# dmesg
<snip>
wlan: 0.8.4.2 (Atheros/multi-bss)
wlan: mac acl policy registered
ath_hal: 0.9.15.1 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.5 (Atheros/multi-bss)
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 7.9 phy 0.0 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfcff0000, irq=9
firewall# iwconfig
lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
eth2 no wireless extensions.
wifi0 no wireless extensions.
So where do I start to bring the interface up? I looked at the Madwifi site
and it suggests-
wlanconfig ath0 create wlandev wifi0 wlanmode ap
but it seems wlanconfig isn't a supported command for Bering, or am I wrong?
Maybe there are some other packages or modules I need to load... Thanks
for your help!
Jeremy
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/