Hello Eric, It looks like a problem with the watchdog and not shorewall. Probably the watchdogtimer which ends at the time shorewall starts. Did you change /etc/modules on the running system or in the etc.lrp package? Please rename your configdb.lrp to configdb.bak and try again. (You can also change the etc/modules file in the configdb package)
Are you sure you used the wd1100 module from the latest kernel tarball? Only that one will understand parameters. Eric > Hi, > > > I just tried installing Bering-uClibc_3.0-beta2 on a WRAP box and got > the device into an infinite reboot loop. The last line printed to console > before each reboot is: > > Compiling /etc/shorewall/rules... > > > I'll describe what I did as best I can remember. And should note: > I've been running Bering uClibc on this WRAP box for two years, and on > a Soekris box for about three. I put 3.0-beta1 on the Soekris without > problems, but hadn't tried on this box. Bering-uClibc 2.4.2 is what it's > been running for a while. It's fine now that I've restored it to 2.4.2: > not a hardware problem. > > * On my desktop, downloaded the .bin file, modules and initrd_ide.lrp > as well as some other packages from the sourceforge site. Did this last > night, so I assume they were current. > > * Mounted the .bin file -o loop and extracted its contents. Replaced > initrd.lrp with initrd_ide.lrp. Edited /etc/inittab in etc.lrp for serial > console. Extracted wd1100.o from the modules file. scp'd all this to the > CF card on my WRAP box. > > > * On the WRAP box, moved the working files out of position and set up > the new ones. Ran syslinux -s /dev/hda1. Rebooted. > > * 3.0 beta 2 came up fine over serial console. Via serial, I changed > hostname, set a password, and edited /etc/network/interfaces and turned on > dhcp in dnsmasq. Edited modules.lrp to add natsemi and crc32 and to > remove softdog. I saved this config and rebooted. Without wd1100 in place > I had to unplug to restart, but it came back > up with my changes having stuck. > > * Still on serial, I generated dropbear keys and restarted dropbear. > I was then able to get a DHCP address and connect via ssh from my > desktop so I stopped using the serial connection. > > * I tried loading wd1100 at the command line using the new parameters > in /etc/modules. 'wd1100 timeout=25 graceful=0'. I got complaints about > the timeout param. I then installed without parameters and IIRC it was > ok. I added the wd1100 to moddb.lrp, enabled the 'wd1100 timeout=25 > graceful=0' line in /etc/modules and backed up everything then rebooted. > > * That put me into an infinite loop, with shorewall crashing (I > assume) and rebooting the device. I pulled the CF card out of the device > and fixed /etc/modules, first removing the parameters to wd1100 and, when > that didn't help, removing wd1100 altogether. Neither of these helped. > Though I *think* I've gone back to a state > that was working, clearly I haven't. > > Is there anything I can do to help debug this? I'm ok with running > 2.4.2 for a while, but would love to help track this down. The -C > option to minicom lets me log serial output, so perhaps I can turn on more > verbose logging in shorewall? > > Note, though: I made no changes to shorewall.lrp! > > > Thanks, > > > --Eric > -- > ************************************************************************** > **** > * From the desktop of: Eric House, [EMAIL PROTECTED] > * > * Crosswords 4.1.4 for PalmOS now ARM-native: > xwords.sourceforge.net * > ************************************************************************* > ***** > > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, > security? Get stuff done quickly with pre-integrated technology to make > your job easier Download IBM WebSphere Application Server v.1.0.1 based on > Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > ------------------------------------------------------------------------ > leaf-user mailing list: [email protected] > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
