Andrew, >> >> Hi Andrew, >> >> >> Are you sure both the zebra and ripd daemons are running? I don't use >> ripd, but zebra/ospf is working fine. The uClibc version has the >> complete feature set. >> >> Eric >> >> >>> >> >>> I would like to get zebra + ripd working on my Bering uClibC 3.0.2 >>> system but am running into problems. I have zebra + ripd working as I >>> want/expect on RHL9, but when I try the same configuration files on >>> Bering uClibC >>> 3.0.2 I >>> get errors such as: >>> >>> Starting Zebra daemon: ripdThere is no such command. >>> Error occured during reading below line. >>> neighbor 192.168.1.1 >>> >>> My configuration files: >>> >>> >>> >>> ----- start /etc/zebra/zebra.conf ----- >>> hostname Router password zebra >>> >>> interface eth0 no shutdown multi cast >>> >>> interface eth1 no shutdown multicast >>> >>> log file /var/log/zebra.log ----- end /etc/zebra/zebra.conf on BUC >>> 3.0.2 >>> ----- >>> >>> >>> >>> ----- start /etc/zebra/ripd.conf on BUC 3.0.2 ----- >>> hostname ripd password zebra >>> >>> router rip version 2 interface eth0 interface eth1 neighbor >>> 192.168.1.1 >>> !redistribute kernel >>> !redistribute static >>> redistribute connected >>> >>> log file /var/log/ripd.log ----- start /etc/zebra/ripd.conf on BUC >>> 3.0.2 >>> ----- >>> >>> >>> >>> If I comment out the 'neighbor' command and include any of the >>> 'redistribute' commands I get a similar error to the effect that the >>> commands do not exist. >>> >>> Are all of the zebra/ripd commands actually implemented in BUC? >>> Anyone know why this is happening, or how to fix this? >>> >>> >>> >>> Thanks in advance. >>> >>> >>> >>> -- >>> View this message in context: >>> http://www.nabble.com/Problem-with-zebra-%2B-ripd-on-Bering-uClibC-3.0 >>> .2- >>> tf3626885.html#a10127396 Sent from the leaf-user mailing list archive >>> at Nabble.com. >>> >>> >>> >>> >>> --------------------------------------------------------------------- >>> ---- >>> This SF.net email is sponsored by DB2 Express >>> Download DB2 Express C - the FREE version of DB2 express and take >>> control of your XML. No limits. Just data. Click to get it now. >>> http://sourceforge.net/powerbar/db2/ >>> ---------------------------------------------------------------------- >>> -- >>> leaf-user mailing list: [email protected] >>> https://lists.sourceforge.net/lists/listinfo/leaf-user >>> Support Request -- http://leaf-project.org/ >>> >>> >>> >> >> >> >> ----------------------------------------------------------------------- >> -- >> This SF.net email is sponsored by DB2 Express >> Download DB2 Express C - the FREE version of DB2 express and take >> control of your XML. No limits. Just data. Click to get it now. >> http://sourceforge.net/powerbar/db2/ >> ------------------------------------------------------------------------ >> leaf-user mailing list: [email protected] >> https://lists.sourceforge.net/lists/listinfo/leaf-user >> Support Request -- http://leaf-project.org/ >> >> >> > > Eric: > > > If you look at the error message it indicates that Zebra is starting the > ripd service. Besides, the 'neighbor' command appears only in the > ripd.conf file, which I assume is only read by ripd when it tries to > start. > Can you try to start with the default configuration and check the output of "ps", after that make your changes (in ripd.conf first) and restart the ripd with "/etc/init.d/ripd restart".
Eric ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
