>FS108 8 port SWITCH for less than a UPS would cost Yes do that. In fact, if its not too much bother, I personally would get rid of the other hub too, but if it remains where it is there should be no problems.
>How would I track down a bad NIC? Swap the cable, and connect a switch on ETH1 temporarily. Reboot Bering to reset the stats on the card (or do it through software if you can) and use the connection for a while to see what you get. With the number of errors you are getting it should be obvious fairly quickly. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/