On Thu, 2008-24-01 at 09:50 -0300, Christian Villa Real Lopes wrote: > Stephen Lee wrote: > > Hi, > > > Hi > > I've got an Intel D946GZIS MB which has an on-board 82562G nic (10/100) > > that should be recognized by the e100 driver. I've tried that driver (and > > e1000) from both Bering uClib 3.0.2 and 3.1Beta3 releases and the nic is > > not recognized. Knoppix 5.1 has no problem with identifying it. There's > > also a Realtek 8139D PCI nic that is recognized by both releases. Any > > suggestions on what to do next is appreciated. > > > I saw this problem many times with newer motherboards from Intel, the > PCI IDs of your nic is not present on these modules. The PCI IDs are > compiled into the module so it can identify which nics it recognize. You > need to put this nic ID on the source and recompile it >
Thanks Christian, Looks like the latest source code for e100, according to Sourceforge, is dated 2006-12-01 so that would explain the missing PCI ID. Is it possible to download the kernel source for 2.4.33 and then do the usual kernel configs and make the e100.o module in that environment or do I need a running 2.4.33 environment? Thanks Stephen ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
