Brent Gardner wrote: > I have several devices that run Bering-uClibc v3.0-Beta2. These devices > boot from CD and read and save config on USB flash drive. > > I'm trying to upgrade to v3.1.1-Beta2 but having a bit of trouble with > the flash drive. > > On my test machine and on 2 other machines the setup works as expected, > but on the target machine, the machine does not see the flash drive > during boot so packages and config are not loaded. But after booting, I > can mount and access the flash drive, no problem. > > I'm using the same CD and flash drive on the test machines and the > target machine. I've also tried burning a new CD and using other flash > drives. The target machine works fine with v3.0-Beta2. > > I've been digging through the logs, comparing logs between the machines > that work and the one that doesn't, I can't find any obvious issues. > I've tried switching around the module load order in initrd. > > > Can anyone give me other ideas to consider? >
Sorry, I was looking at the wrong logs earlier. I see lines such as these when the machine boots without reading the flash drive properly: usb.c: USB device not accepting new address=3 (error=-110) usb.c: USB device not accepting new address=4 (error=-110) I'll be researching this but if anyone has an idea I'd love to hear it. Brent Gardner ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/