Well, I cannot get either a single card up & running.
The card is Senao NL-2511CD+EX2 w/PCI-PCMCIA adapter.
1.- After bootup I got the following output from ip and iwconfig:
# ip link
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:0d:87:2f:a9:f4 brd ff:ff:ff:ff:ff:ff
4: netcs0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:02:6f:07:30:81 brd ff:ff:ff:ff:ff:ff
voldemort: -root-
# ip addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:0d:87:2f:a9:f4 brd ff:ff:ff:ff:ff:ff
inet 200.68.122.145/29 scope global eth0
4: netcs0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:02:6f:07:30:81 brd ff:ff:ff:ff:ff:ff
inet 10.4.4.1/24 scope global netcs0
voldemort: -root-
# iwconfig
lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
netcs0 IEEE 802.11-DS ESSID:"amb1"
Mode:Master Tx-Power=20 dBm
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
where some data is missing.
2.- Configuration as per /etc/network/wireless.config is as follows:
# Wireless configuration parameters
#
netcs0_RTS=""
netcs0_KEY=""
netcs0_ESSID="amb1"
netcs0_CHANNEL="1"
netcs1_MODE="MANAGED"
netcs1_ESSID="amb2"
netcs1_NICK="voldemort"
netcs1_RATE="1M"
netcs1_TXPOWER="15mW"
netcs1_CHANNEL="11"
netcs0_TXPOWER="100mW"
netcs0_NICK="voldemort"
netcs0_MODE="MASTER"
netcs0_RATE="2M"
3.- Card driver seems correctly loaded to me, cardctl ident and lsmod output
follows:
voldemort: -root-
# cardctl ident
Socket 0:
product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", ""
manfid: 0x0156, 0x0002
function: 6 (network)
voldemort: -root-
# lsmod
Module Pages Used by
hostap_cs 81052 1
hostap 62032 0 (unused)
hostap_crypt_wep 2656 0 (unused)
hostap_crypt 1028 0 [hostap hostap_crypt_wep]
ds 6380 1 [hostap_cs]
i82365 22564 1
pcmcia_core 37120 0 [hostap_cs ds i82365]
ip_nat_snmp_basic 8480 0 (unused)
ip_nat_tftp 1656 0 (unused)
ip_nat_mms 2872 0 (unused)
ip_nat_pptp 1872 0 (unused)
ip_nat_proto_gre 1184 0 (unused)
ip_nat_h323 2552 0 (unused)
ip_nat_irc 2328 0 (unused)
ip_nat_ftp 2904 0 (unused)
ipt_state 376 0 (unused)
ipt_MARK 652 0 (unused)
ipt_REDIRECT 616 0 (unused)
ipt_MASQUERADE 1096 0 (unused)
iptable_nat 15392 9 [ip_nat_snmp_basic ip_nat_tftp ip_nat_mms ip_na
t_pptp ip_nat_proto_gre ip_nat_h323 ip_nat_irc ip_nat_ftp ipt_REDIRECT ipt_MASQU
ERADE]
iptable_mangle 1968 0 (unused)
ip_conntrack_tftp 1612 1
ip_conntrack_mms 2988 1
ip_conntrack_pptp 2296 1
ip_conntrack_proto_gre 1836 0 [ip_nat_pptp ip_conntrack_pptp]
ip_conntrack_h323 2188 1
ip_conntrack_irc 3212 1
ip_conntrack_ftp 3820 1
ip_conntrack 18060 9 [ip_nat_tftp ip_nat_mms ip_nat_pptp ip_nat_h323
ip_nat_irc ip_nat_ftp ipt_state ipt_REDIRECT ipt_MASQUERADE iptable_nat ip_conn
track_tftp ip_conntrack_mms ip_conntrack_pptp ip_conntrack_proto_gre ip_conntrac
k_h323 ip_conntrack_irc ip_conntrack_ftp]
bridge 17204 0 (unused)
airo 105616 0 (unused)
rtl8139 12284 1
pci-scan 2944 1 [rtl8139]
mii 2256 0
cls_u32 4832 0 (unused)
sch_sfq 3744 0 (unused)
sch_htb 18688 0 (unused)
sch_tbf 2272 0 (unused)
softdog 1612 1
cramfs 36920 5
ide-probe-mod 8816 0
ide-disk 9752 1
ide-mod 65796 1 [ide-probe-mod ide-disk]
nftl 18308 0 (unused)
docprobe 1360 0
docecc 3680 0 (unused)
mtdcore 1632 1 [nftl]
4.- Output from dmesg command is a bunch of entries as the following:
voldemort: -root-
# dmesg
NETDEV WATCHDOG: netcs0: transmit timed out
hostap_cs: netcs0 Tx timed out!
NETDEV WATCHDOG: netcs0: transmit timed out
hostap_cs: netcs0 Tx timed out!
NETDEV WATCHDOG: netcs0: transmit timed out
hostap_cs: netcs0 Tx timed out!
NETDEV WATCHDOG: netcs0: transmit timed out
hostap_cs: netcs0 Tx timed out!
NETDEV WATCHDOG: netcs0: transmit timed out
hostap_cs: netcs0 Tx timed out!
.
.
.
.
Any idea to diagnose this appreciated.
Thanks in advance.
abel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
leaf-wisp-dist mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
