On 20/05/16 01:46, Alexander Couzens wrote:
+From: Alexander Couzens <lyn...@fe80.eu>
+Date: Fri, 20 May 2016 01:43:41 +0200
+Subject: [PATCH] ath9k: Update AR9340 initvals for txgain table mode 4
+
+Changing the table for 5Ghz HT20/HT40 to fix a 10dbm signal difference
+on the client side when running LEDE on the AP (TpLink CPE510) instead
+of the vendor driver. These values are taken from a TpLink CPE510 running
+the vendor firmware using a small script that retrieved the same registers
+as already defined in the tx gain table.
+
+Signed-off-by: Alexander Couzens <lyn...@fe80.eu>
+---
+
+Because I don't have any datasheets about this wireless chip I can not
+really say, what I'm changing.
+
+ drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
Are these specific to the CPE510 or generally applicable to ar9340?
From the other patch there is a LNA on the receive, there may also be a
power amp on the transmit. Which these values are related to?
Conor
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
